+
+
+
+
Simultaneous rough and finish grinding
NMGM-2HF is a highly efficient grinding machine with two external grinding wheels. Mounting two different grinding wheels at the same time, rough and finish grinding can be performed in one operation. As a consequence, an operator can save significant machining time.
Expand versatility and scalability with sophisticated CNC
NMGM-2HF is equipped with a FANUC control as a standard and our original interactive software, this machine reduces an operator's burden in complex shape machining.
Can be equipped with internal grinding unit
By mounting internal grinding unit, NMGM-2HF enables external, internal and end face grinding in one clamping.
Other combination, outer diameter and internal diameter grinding is available.
Items | NMGM-2HF | |
---|---|---|
Method of holding workpiece | Scroll chuck | max. 5 inches |
Precision collet chuck | ∅0.5 ∼ ∅8.0 mm | |
∅3.0 ∼ ∅20.0 mm | ||
Large-dia. collet chuck | ∅5.0 ∼ ∅32.0 mm | |
Workhead spindle (X) | Max. travel | 255 mm |
Min. input increment | 0.0001 mm | |
Servo motor | 1.5 kW | |
Speed | 0 ∼ 1500 rpm | |
Hole through spindle | ∅32 mm | |
Grinding wheel spindleⅠ (Y) | Max. travel | 105 mm |
Min. input increment | 0.0001 mm | |
Servo motor | 5 kW | |
Speed | 0 ∼ 6000 rpm | |
Swivel angle | 0 ∼ 10.5 deg. | |
Wheel fixing method | Dedicated flange | |
Wheel size | ∅250 mm | |
Grinding wheel spindleⅡ (Z) | Max. travel | 120 mm |
Min. input increment | 0.0001 mm | |
Servo motor | 1.5 kW | |
Speed | 0 ∼ 6000 rpm | |
Swivel angle | 0 ∼ 10.5 deg. | |
Wheel fixing method | Dedicated flange | |
Wheel size | ∅150 ∼ ∅250 mm | |
Lubrication method | Automatic lubrication system | |
Others | Full enclosure | |
Machinesize (W×D×H) | 1665 × 2625 × 1970 mm | |
Floor space (W×D×H) | 1880 × 2830 × 1970 mm | |
Machine weight | 約2,500 kg | |
Power consumption | 24 kVA | |
Control | FANUC | |
Optional equipment (External + External grinding) | ||
Scroll chuck: 5 inches | ||
Collet chuck (Select one from the above-mentioned collet chucks) | ||
Coolant unit | ||
Dust collector | ||
Contouring editor (shape input support software) | ||
Tri-colored light | ||
Dedicated grinding wheel flange | ||
The contents are subject to change without notice. |